Universal Accessories - Page #1
NEW UAT DESIGN -
Zedjet UAT 'Bubble Trap'
$46.00 USD
Clunk Length Clunk width (Middle)
L - 42.08 mm (1.65 80 Inch) W - 11.90 mm (.46 90 Inch)
But, it uses a very narrow fuel clunk (Shown Below)
They are much better made & also Much simpler to use
They have proven MORE reliable also.
They will fit nicely through the hole in any tank,
as they are quite narrow.
They all have an O ring fitted to the end to cushion the clunk,
against potentially damaging a fiberglass tank.
PRODUCT INFORMATION
This is the new Zedjet UAT 4oz capacity bubble trap tank.
It will prevent any bubbles reaching the turbine, thus preventing a flame-out
It is a good quality and excellent value bubble trap
using a center-of-tank pick-up which has the bubble filter attached.
The fittings now incorporate O ring seals and each is pressure tested to 2 Bar.
Also new is the inclusion of the 'ceramic' style filter which has virtually no restriction.
The center fitting on the cap feeds the turbine pump,
whilst the two connections above the cap provide
a fill line and supply input from the main tanks.
125 ML - (4 oz)
(UAT - BUILD) ............... $82
Uses a Sock style
Just Turbines - UAT (Filter Style)
$50.00
possibility of air entering the turbine. The Air Trap is placed in
series between the last fuel tank and the fuel pump.
The system is filled through a line in the Air Trap.
The rectangular shaped tank can be mounted vertically or
horizontally and produce the same results making it convenient
to fit into just about any model and it will work with any model
size turbine engine.
Click for more Accessories
