L-39 Albatross  (ARF)  
Scale 1/5

                                                                  


    

              WingSpan - 74" 1883 mm
               Length - 95" 2420 mm
                      

              Airframe + Retracts                            
             US $1,880 + $720 = $2,600

 

            Cylinders Needed

            (These can be found on the Universal accessories page)

                      

                        
Four colors  Now available

 

                  Breitling                              Russian Splinter (Blue Camo)

 



                                              









                                                                                                       

                                                Custom CamLex JL Cockpit (Shown)

               JL L-39 Albatross servo requirements*
The following information is based on opinions & recommendations
offered from  facts & tests of many different Pilots.
The opinions on requirements for flight do not necessarily
represent the opinions of CamLex Enterprises and its owners.
If following the recommendations below you will be doing so willingly and will
hold CamLex and its affiliates Blameless in case of flight resulting in damage.

                                       Thank You!




                 Servo Requirements *
                 2 servos -Flaps (Recommend) JR 84-11
                 2 servos for the Ailerons (Recommend) JR 84-11
                 2 servos for the Elevators (Recommend) JR 86-11
                 1 servo for the Rudder  (Recommend) JR 86-11
                 1 servo for the nose Gear (at least 88 oz of Torque) (Recommend)
                 1 servo for the retracts




                                                     
 
Please note this is a large plane of 1/5 scale. As for thrust,
We would recommend one that has similar thrust and size.


Like a Jetcat P-160. *
JL Used a Jetcat P-120 for the test flight.
Thrust is a little less but still fly's well.



                                   *
                                    L-39 is designed to use two fuel tanks with the capacity of 1.6*2.
                                    3.2 liters of fuel capacity.
                                    The L-39's  weight is 14kg. (30.86) LB
                                    The weight of 30.86 lbs is a finished weight with engine, servos,
                                    retracts, tanks etc.. (Without Fuel)






                                             OTHER L-39 PARTS WE SUPPLY

        (L-39W)       L-39 - Right & Left Wing  (Wing Part)  - 
                               $450/pair $280/pc (single one, left or right)
 
           (L-39TP)       L-39 - Bifurcated Tail pipe  - ( $160 / PC ) 
           (L-39FT)       L-39 - Fuel Tank Set ( $60 / set ) 2 pieces per set 
   (L-39STRUTS)       L-39 - Strut Package 2 Mains, 1 nose - ( $350 / set = 3x Pieces)
           (L-39DE)       L-39 - Decals set - ( $12 / set )
           (L-39NS)       L-39  - Nose Part only....Excluding Canopy  ( $320 / Piece 

           (L-39HS)       L-39  - Horizontal Stabilizer (Tail Section) ( $257/set )  Including Elevator
                               ( one set means two PCs in Left & Right )  
                                tail section without wings or nose (Horizontal stab) Add Mechanism for ($50)

           (L-39MF)       L-39  -  Main fuselage  without wings, tail section or hardware 
                                (Fuselage part only, excl. nose )( $650 / PC )

            (L-39SP)       L-39 -  Steering Pin & Barrel for the Nose gear  ( $20 )