JETCAT USA TURBINES
If you see something that we do NOT have on our site, please
let us know and we will do our best to get it for you.
THANK YOU!
P-100 AVAILABLE NOW
EMAIL US FOR "SPECIAL PRICE"
P20-SE
P60-SE Special Edition
New I/O Board and Charge Plug adds $35
A123 Battery Compatibility adds $25
Without GSU saves -$100
|
JetCat P60-SE SPecial
Edition Turbine complete with starter includes:
|
New I/O Board and Charge Plug adds $35
A123 Battery Compatibility adds $25
Without GSU saves -$100
JetCat P80-SE
New I/O Board and Charge Plug adds $35
A123 Battery Compatibility adds $25
Without GSU saves -$100
Introducing the new JetCat P80-SE with more POWER and enhanced reliability.
The P80-SE continues our extremely sucessfull P80 engine.
The new design of the P80-SE incorporates an optimized compress
or/diffuser-system, resulting in higher engine performance and reliability.
The engine follows throttle commands almost without delay.
In addition to the outstanding features of or ECU V6.0,
the new ECU V6.3 has an „auto power down“ function built in,
which allows to switch off the engine power supply (--> receiver off)
before the engine cool down sequence has been finished.
In this case the ECU will stay powered on, finish the cool down
sequence and then auto power down itself.
The values are approximate and can vary slightly from engine to engine.
Values at Standard Temperature and Pressure.
JetCat P-80-SE turbine complete with starter includes:
- Jet-tronic ECU (fuel control electronics)
- GSU (Display and Programmer)
- LED I/O board
- Miniature fuel pump
- Electronic starting gas valve
- Electronic Fuel valve
- Fuel tubing, tubing connector set, filters, and cable set
- 2 cell, 2500mA LiPoly battery pack
- Starting gas tank
- Turbine mounting clamp, RamTec compatible
- Detailed instruction manual
P120 Special eXtremeTurbine Complete
New I/O Board and Charge Plug adds $35
A123 Battery Compatibility adds $25
Without GSU saves -$100
_______________________________________________
JetCat P-120-SX turbine complete with starter includes:
- Jet-tronic ECU (fuel control electronics)
- CAD designed and machined from billet compressor wheel
- Internal kerosene starting plug for single fuel operation. Fast startup!
- GSU (Display and Programmer)
- LED I/O board
- Miniature fuel pump
- Electronic starting gas valve
- Electronic Fuel valve
- Fuel tubing, tubing connector set, filters, and cable set
- 2 cell, 2500mA LiPoly battery pack
- Turbine mounting clamp, RamTec compatible
- Detailed instruction manual
P160-SX Special eXtreme
$4,195 - $4,145
New I/O Board and Charge Plug adds $35
A123 Battery Compatibility adds $25
Without GSU saves -$100
JetCat P160-SX turbine complete with starter includes:
- 6 lbs more thrust than the P120-SX
- CAD designed and machined from billet compressor wheel
- Internal kerosene starting plug for single fuel operation. Fast startup!
- Jet-tronic ECU (fuel control electronics)
- GSU (Display and Programmer)
- LED I/O board
- Miniature fuel pump
- Electronic starting gas valve
- Electronic Fuel valve
- Fuel tubing, tubing connector set, filters, and cable set
- 2 cell, 2500mA LiPoly battery pack
- Turbine mounting clamp, RamTec compatible
- Detailed instruction manual
New I/O Board and Charge Plug adds $35
A123 Battery Compatibility adds $25
Without GSU saves -$100
____________________________________________________________________________
JetCat P-180 turbine comes complete
with HEAVY DUTY starter and includes:
- Jet-tronic ECU (fuel control electronics)
- GSU (Display and Programmer)
- LED I/O board
- Miniature fuel pump
- Electronic starting gas valve
- Electronic Fuel valve
- Fuel tubing, tubing connector set, filters, and cable set
- 2 cell, 3800mA LiPoly battery pack
- Starting gas tank
- Turbine mounting clamp, RamTec compatible
- Detailed instruction manual
P200-SX is available NOW!
New I/O Board and Charge Plug adds $35
A123 Battery Compatibility adds $25
Without GSU saves -$100
$5,495 - $5,425
with HEAVY DUTY starter and includes:
· Jet-tronic ECU (fuel control electronics)
· GSU (Display and Programmer)
· LED I/O board · Miniature fuel pump
· Electronic starting gas valve
· Electronic Fuel valve
· Fuel tubing, tubing connector set, filters, and cable set
· 2 cell, 3300mA LiPoly battery pack
· Starting gas tank
· Turbine mounting clamp
· Detailed instruction manual
· Internal kerosene starting plug for single fuel operation. Fast startup!
Link to PDF file for the P200 Outline drawing.
SPT5 - V3.0 Turbo-Prop
New I/O Board and Charge Plug adds $35
A123 Battery Compatibility adds $25
Without GSU saves -$100
JetCat SPT5 turbo-prop complete
with starter includes: